Go to the home page
0 €0.00*

Galvanised cast steel pipe connector 60.3 mm (2")

For every combined order of pipes and fittings, the shipping charges for the fittings are waived.
Grey, cylindrical cast iron street base with a round top plate. Blue post in the base. Ground sleeve pipe connector with side brackets for concrete anchoring and an opening for an adjusting screw to secure the 48.3 mm post tube.
Street base 60.3 mm (2”)
A ground sleeve pipe connector in concrete for securing the support pipe. This allows posts to be inserted and held in place with a locking set screw.
Product number 608054F

€38.34*
A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.
Mesh holder, single 60.3 mm (2”)
Single-sided wire mesh clamp
Product number 608070F

€2.35*
A galvanised double mesh holder, a double-sided wire mesh clamp, is mounted centrally on a vertical blue post. It secures two dark wire meshes on both sides and is fastened with two screws.
Mesh holder, double 60.3 mm (2”)
Double-sided wire mesh clamp
Product number 608071F

€2.53*
Sturdy, galvanised metal flag mount for a blue pole at a 45-degree angle. With a square mounting plate, four fixing holes and two adjusting screws for secure locking of the flagpole.
Flag mount 33.7 mm (1”)
New to our range are the flag mounts. These mounts create a 45-degree angle so that the flagpoles protrude from the wall, allowing your flags to fly freely.
Product number 6080FP1

€10.67*
Sturdy, silver-coloured metal connector (cross T-piece) that holds four blue cylindrical tubes in a cross shape: two horizontally, two vertically. Connections secured with visible Allen screws, ideal for truss structures.
Cross T-piece, combined, 60mm, 2"
1320 g Frequently used for truss structures. The support opening can be adjusted to suit the intended application. For shelving trusses, the outer opening is in the support, and for pallet racks, the support is located inside the load-bearing elements
Product number 608030F

€32.73*
Sturdy, silver flag mount made of galvanised metal, holds a blue flagpole at a 45° angle. With a flat mounting plate (4 screw holes) for wall mounting and a side-mounted Allen key for securing. For 33.7 mm pole diameter.
Flag bracket 33.7 mm (1”)
This bracket creates a 45-degree angle so that the flagpole protrudes from the wall, allowing your flags to fly freely.
Product number 6080FP2

€16.04*
A short silver metal T-piece connects a horizontal pipe to a vertical pipe. Both blue pipes are secured with grub screws. The horizontal pipe is thicker than the vertical one (unequal diameters). Rough surface: galvanised steel.
Short T-piece, combined dimensions: horizontal 60.3 mm (2”) – vertical 48.3 mm (6/4”)
Same as Type 2, but this version is used to connect pipes of different diameters.
Product number 608002FE

€10.14*
Silver, galvanised cross piece as a 4-way connector for tubes. Connects four blue, horizontal support tubes at right angles and a fifth blue tube vertically through the centre. Each connection secured with an Allen screw.
cross connector 90°, 60mm, 2"
1980 g4-way connector for securing supports with 4 horizontal tubes arranged perpendicular to one another. The support tube fits through the connector.
Product number 608026F

€34.23*
A double silver metal joint connects a central blue post to two blue tubes sloping downwards. These are fixed at an adjustable angle using hex socket screws and can be mounted flexibly.
Double articulated connector, 60.3 mm, 2", comprising 1 x 608038F and 2 x 608042F, including 2 M10x40 bolts
1 x 608038F and 2 x 608042F. Articulated pipe connector for adjustable angle mounting on both sides of the post.
Product number 608046F

€29.94*
Silver-coloured, galvanised container clamp for securing a flagpole. Round opening approx. 60 mm, flat mounting plate with two screw holes for fitting to standard shipping containers. Allen screw for securing the tube.
Container clamp 60.3 mm (2”)
For flagpoles at the front of the containerPipe connector for attaching a flagpole to a container, for a pole with a diameter of Ø 60 mm. Design: Surface treatment: galvanised. Suitable only for standard 20-foot shipping containers. Type 5080C3400F Size 60.3 mm Weight 1.400 kg
Product number 6080C3400F

€21.07*
A transparent plastic bag filled with lots of grey plastic screw caps. Each cap has a flat, round top and a cylindrical insert. The grey caps are evenly distributed.
Plastic screw cap grey
(25 pieces per bag) For D / E / F
Product number 608078DEF

€9.26*
Round, black plastic plug with a slightly textured, matt front. Sides with concentric grooves for a secure fit in thick-walled pipes or openings. For sealing pipe ends.
Plastic plug, 2" (60.3 mm), black, for thin-walled pipes
Plastic cap for sealing the pipe end.
Product number 608074F-L

€3.23*
A round, grey plastic plug with a smooth, flat surface and four circumferential ribs on the side, which ensure a secure fit in a pipe with a diameter of 60.3 mm. The plug is from the brand Lunado.
Plastic plug for 2" pipe (60.3 mm), grey
Product number 6080G74F

€2.06*
Polished stainless steel adjusting screw, shown from three angles. Cylindrical, with external thread and deep hex socket. 1/4-inch screw for pipe connectors, shown in side and top views.
Stainless steel adjusting screws for pipe connectors. 3/8” (for D / E / F)
Product number 608076DEF

€2.31*
Round, black plastic plug with a slightly textured, matt front. Sides with concentric grooves for a secure fit in thick-walled pipes or openings. For sealing pipe ends.
Plug, black plastic 60.3 mm (2”), for thick-walled pipes
Plastic cap for sealing the pipe end.
Product number 608074F

€2.06*
Black, L-shaped Allen key shown diagonally on a white background. Two arms: short arm pointing up and to the left, long arm pointing down and to the right. Hexagonal tips. For fitting pipe connectors.
Allen keys for pipe connectors for D / E / F
All you need to install our pipe connectors is a standard Allen key. Available in various inch sizes: D: 1 1/4" (42.4 mm) Size E: 1 1/2" (48.3 mm) Size F: 2" (60.3 mm)
Product number 608075DEF

€1.33*
Metal plug with a round, flat front and a square shaft tapering towards the rear. Grey surface with a slightly rough texture. For sealing a thick-walled pipe, suitable for Ø 33.7 mm (1 inch).
Plug, metal 60.3 mm (2”)
Aluminium cap for sealing the end of the pipe. Suitable only for thick-walled pipes.
Product number 608073F

€5.89*
Silver-coloured double joint with swivelling elements, connecting three blue tubes: one tube vertically, two horizontally at a 90-degree angle. Joint connector for 60.3 mm tubes, enabling flexible construction.
Double elbow, 90°, 60.3 mm (2”), comprising 1 x 608040F and 2 x 608042F, including 2 M10x45 bolts
Double 90° articulated connector, 60.3 mm, 2", Consisting of 1 x 608040F and 2 x 608042F, including 2 M10x45 bolts
Product number 608048F

€30.66*
Certified specialist retailer

Certified specialist retailer

Here you benefit from expert advice, solutions tailored to your needs and genuine specialist expertise. Reliable after-sales service is guaranteed!
Your Tuboconex team of experts

Secure payment

Secure payment

You can pay by credit card, Apple Pay and Bancontact. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & construction planners

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this is a guarantee of quality, expertise and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...