Pipe coupler Ø 26.9 mm – galvanised cast steel

Galvanised cast steel pipe connector 26.9 mm (¾")

For every combined order of pipes and fittings, the shipping charges for the fittings are waived.

Grey metal T-piece for 21.3 mm pipes connects two blue pipes. One pipe runs horizontally through the upper opening, the other vertically downwards. Two hexagon head screws secure the pipes in the connector.

Short T-piece 26.9 mm (¾”)

For creating a vertical connection between two pipes. Upper pipe connector for straight and horizontal railing posts. This pipe connector cannot be used to connect a horizontal pipe within the pipe connector.

Product number 608002B

€3.35*

A short, silver metal T-piece with a rough surface, connecting two blue pipes at a 45-degree angle. The two pipes are each secured to the fitting by a hexagon head screw, with one running vertically and the other diagonally.

T-piece, short 45° 26.9 mm (¾”)

Creates a connection between two pipes at a 45° angle.

Product number 608003B

€4.82*

Silver-coloured T-pipe connector joins three blue pipes. Two run horizontally and one vertically downwards, creating a sturdy T-connection. Each connection is secured with an Allen screw.

T-piece, long 26.9 mm (¾”)

Similar to Type 2. This pipe connector can be used when a connection point is required in a horizontal pipe.

Product number 608004B

€5.68*

Sturdy, silver-coloured elbow connector joins two blue tubes (60.3 mm/2 inches) at a 90° angle. Visible matt, rough cast surface; one Allen screw each for secure fastening to railings.

90° elbow 26.9 mm (¾”)

Elbow connector for use as an end pipe connector for the upper railing element.

Product number 608006B

€4.23*

A cylindrical, silver-grey metal extension piece with a rough, galvanised surface connects two vertical blue tubes. The fitting encircles them and is secured at the top and bottom with two hexagon bolts on each side.

Extension piece, external diameter 26.9 mm (¾”)

Connecting clamp for pipes of the same diameter. Not suitable for heavy vertical loads.

Product number 608008B

€4.37*

A silver-grey, rough-textured tube connector with a visible hexagon socket screw, clamped tightly around a smooth, matt blue tube. It serves as a flush extension of two identical tubes for secure fastening.

Extension piece, internal 26.9 mm (¾”)

A streamlined flush connection between two pipes of the same size. The wall thickness must be 3.2 mm. Do not apply direct load to this connection.

Product number 608009B

€2.51*

Round base plate made of galvanised metal, which encloses a blue tube at the top. An Allen screw secures the tube in the connector. The plate is silver-grey with a rough metallic texture. For fixing the position.

Base plate, round 26.9 mm (¾”)

This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.

Product number 608010B

€4.58*

A round, silver-coloured cast steel base plate with a blue tube running through it. An Allen screw for clamping is visible on the side. The underside has several holes for secure mounting on surfaces.

Round base plate, solid 26.9 mm (¾”)

This tube connector is suitable for structures where the tube must pass through. Suitable for use with, for example, intermediate planks.

Product number 608010TB

€3.72*

A square base plate made of silver, textured metal, which holds a blue tube vertically. A hexagon bolt secures the tube at the side within the through-type connector. Two round holes on the base are provided for fixing.

Base plate, square, solid 26.9 mm (¾”)

This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.

Product number 608011B

€4.66*

Sturdy oval base plate made of grey metal supports a blue vertical post. With two visible fixing holes. Cylindrical tube connector reinforced with wide ribs, secures the post with two hexagon socket screws.

Base plate, oval 26.9 mm (¾”)

Strong base plate for supporting vertical posts. Vertical wide ribs with two adjusting screws increase the strength of the tube connector. The fixing holes in the base flange should be appropriate for the load applied.

Product number 608012B

€7.48*

Blue tube, horizontal, securely clamped at both ends in round grey metal base plates. Each base plate clamps the tube with a clamp and a visible screw. Sturdy connection for 26.9 mm (¾ inch) tube in the kit.

Round base plate with insert (SET) 26.9 mm (¾”)

Product number 608015B

€10.44*

Galvanised three-way corner joint connects three blue tubes at a 90-degree angle: two horizontally, one vertically downwards. Sturdy corner clamp with visible Allen screws for a stable construction, ideal for railing corner joints.

90° three-way corner fitting 26.9 mm (¾”)

Corner connector (90°) for upper railing corner pieces and all other rectangular systems.

Product number 608018B

€5.60*

Grey metal corner joint, connecting four blue tubes at a 90-degree angle. One tube runs vertically through the centre, with three others attached horizontally at the sides. Black fixing screws are visible at the top.

90° corner joint, straight, 26.9 mm (¾”)

Used as a counterpart to Type 18; the pipe fits through the connector.

Product number 608020B

€4.35*

Sturdy, silver-coloured metal cross-piece for a 90° connection of four blue tubes. The connecting clamp guides the tubes horizontally and vertically, with three visible hexagon socket screws for secure fastening. Ideal for railings.

Cross piece, solid 26.9 mm (¾”)

90° connecting clamp between the central element and the post on railings.

Product number 608022B

€4.39*

A galvanised 3-way T-shaped connector joins three blue horizontal tubes at a 90-degree angle. A fourth blue tube runs vertically through the centre. All tubes are secured with hexagonal bolts on the sides.

T-piece for support tube 26.9 mm (¾”)

3-way connector for fixing supports with 3 horizontal tubes arranged vertically to one another. The support tube fits through the connector.

Product number 608024B

€5.46*

Silver, galvanised cross piece as a 4-way connector for tubes. Connects four blue, horizontal support tubes at right angles and a fifth blue tube vertically through the centre. Each connection secured with an Allen screw.

Cross piece for 26.9 mm (¾") support tube

4-way connector for securing supports with 4 horizontal tubes arranged perpendicular to one another. The support tube fits through the connector.

Product number 608026B

€8.18*

A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.

Cross-piece, offset, 90° 26.9 mm (3/4")

The cross-connection clamp (90°) is used for long pipe intersections with supports, reducing cutting costs and increasing the strength of the system whilst maintaining the continuity of the pipe used.

Product number 608028B

€3.97*

Sturdy, silver-coloured metal connector (cross T-piece) that holds four blue cylindrical tubes in a cross shape: two horizontally, two vertically. Connections secured with visible Allen screws, ideal for truss structures.

Cross T-piece, combined 26.9 mm (¾”)

Frequently used for truss structures. The opening in the support can be adjusted to suit the intended application. For shelving trusses, the outer opening is in the support, whilst for pallet racks, the support is located inside the load-bearing elements.

Product number 608030B

€4.58*

Silver-coloured, open metal T-piece, connecting one blue tube horizontally and one vertically. Sturdy T-clamp (open T-piece) for 60.3 mm (2 inches) with a hexagon head screw at the top and an Allen screw at the bottom. Matt, slightly rough surface.

Open T-piece 26.9 mm (¾”)

For the extension and modification of existing structures.

Product number 608032B

€4.37*

Grey cross-piece connects two blue pipes at a 90° angle; open clamp with screw for the stable extension of pipe structures.

Cross piece, open. 90°, 26.9 mm (¾”)

Cross-connection clamp as an addition to an existing structure.

Product number 608033B

€4.05*

Grey, metallic handrail bracket with a round clamp that holds a blue tube horizontally. Flat base plate with a screw hole for wall mounting and a sturdy crossbar. An Allen screw secures the tube in the clamp.

Handrail bracket 26.9 mm (¾”)

For fixing handrails and structures to the wall.

Product number 608034B

€4.97*

Open, galvanised handrail bracket for permanent wall mounting of a blue handrail tube. Solid bracket with a rectangular base plate, two visible fixing holes and a U-shaped element that secures the tube using an Allen screw.

Handrail bracket, open 26.9 mm (¾”)

For fixing handrails and structures to the wall.

Product number 608035B

€5.89*

A silver, metallic swivel eye is securely mounted on a blue vertical tube. The connector features a hexagon socket screw for secure mounting and an arm with a round opening for plates or to act as a swivel.

Articulated eye 26.9 mm (¾”)

For use with Type 42 articulated tube connectors, as well as for fixing panels and boards.

Product number 608036B

€2.51*

A silver, double metal joint is clamped around a vertical blue pipe. It has two round eyelets opposite each other in a horizontal line and is secured with an Allen screw.

Double swivel eye, 26.9 mm (¾”)

Similar to Type 36, with two eyes on the same axis (180°).

Product number 608038B

€3.39*

A silver-coloured, double metal swivel eye clamps onto a vertical blue tube. Two eyelets offset by 90 degrees: one with a side-mounted locking screw, the other with a round through-hole.

Double swivel eye, 90°, 26.9 mm (¾”)

Similar to Type 36, with two eyelets arranged perpendicular to each other.

Product number 608040B

€3.31*

Detailed view of a galvanised steel joint bracket holding a blue pipe. An Allen screw secures the pipe. Below this is a forked fitting with a round hole for mounting a movable joint.

Articulated bracket 26.9 mm (3/4"), 1 M10x35 screw

1 M10x35 screw. A component of the articulated pipe connector that is not generally used on its own, but in combination with, for example, Type 36.

Product number 608042B

€3.56*

A silver, sturdy joint connects two blue tubes at an adjustable angle. It consists of two parts with an axle, each of which clamps a tube in place using an Allen screw. One tube runs vertically, the other horizontally to the left.

Articulated joint 26.9 mm (¾”), consisting of 1 x 608036B and 1 x 608042B

Consisting of 1 x 608036B and 1 x 608042B. Joint, single. Articulated pipe connector for adjustable angle mounting.

Product number 608044B

€6.13*

A double silver metal joint connects a central blue post to two blue tubes sloping downwards. These are fixed at an adjustable angle using hex socket screws and can be mounted flexibly.

Double joint, 26.9 mm (3/4"), comprising 1 x 608038B and 2 x 608042B, incl. 2 M8x35 screws

Consisting of 1 x 608038B and 2 x 608042B Articulated pipe connector for adjustable angle mounting on both sides of the post.

Product number 608046B

€10.71*

A double joint made of grey metal connects three blue tubes. One vertical tube runs through the central clamp, whilst two others are attached at the sides via movable joints: one horizontally, one sloping downwards.

Double joint, 90°, 26.9 mm (¾”), comprising 1 x 608040B and 2 x 608042B, incl. 2 M8x35 screws

consisting of 1 x 608040B and 2 x 608042BArticulated pipe connector for the adjustable angle mounting of corner posts.

Product number 608048B

€10.65*

Adjustable angle joint consisting of two connected parts: at the front, a silver-grey connector for a horizontal and a vertical blue tube; at the rear, a white extension. All tubes are secured with Allen screws, allowing for flexible angle adjustment.

Angle joint, adjustable 1 pair = 2 pieces 26.9 mm (¾”)

ALWAYS 2 PARTS MAKE ONE CONNECTOR! ENTER DOUBLE THE QUANTITY

Product number 608049B

€3.54*

A grey articulated base enclosing a blue rod, positioned diagonally on a white background. It consists of a cylindrical holder and a flat, rectangular mounting plate with two drill holes, connected by a hinge.

Articulated base 26.9 mm (¾”), comprising 1 x 608050 and 1 x 608042B, incl. 1 M10x35 screw

consisting of 1 x 608050 and 1 x 608042BUsed for angled wall mounting or as a support for a support post.

Product number 608051B

€9.36*

A silver-coloured, cylindrical eyelet with a rough surface, clamped firmly around a vertical, smooth, shiny blue tube. On the left, a flat single tab with a circular hole protrudes. Tube connector for panel mounting.

Eyelet section with single tab 26.9 mm (¾”)

Pipe connector for panel mounting.

Product number 608055B

€3.70*

Grey pipe clamp with double bracket: secures a blue pipe via a hex screw. Two flat brackets, each with a mounting hole.

Eyelet section with double tab 26.9 mm (¾”)

Panel mounting tube connector with two eyelets; also used for locking gates.

Product number 608056B

€4.95*

A solid grey metal retaining ring clamps around a vertical blue tube at the centre. On the side is a clearly visible hexagon bolt for secure fastening to the tube. The ring increases friction and prevents slipping.

Adjustment ring, retaining ring 26.9 mm (¾”)

Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.

Product number 608060B

€1.37*

A silver-coloured adjustment ring with a sturdy, right-facing hook is clamped centrally around a vertical blue tube. The tube connector is used to securely attach chains or similar items to tubes and has a rough metal surface.

Adjustable ring with hook 26.9 mm (¾”)

Pipe connector for chain fastenings.

Product number 608061B

€2.19*

A grey, sturdy adjustable ring eye pipe connector firmly attached to a blue pipe. It wraps around the pipe; a visible screw secures it in place. On the left, an open eyelet for attaching further elements. The metal has a slightly rough finish.

Adjustment ring, 26.9 mm (¾”)

Internal hinge pipe connector, for Type 63.

Product number 608062B

€2.80*

A grey, sturdy adjustment ring pin, a pipe connector, is clamped around a vertical blue pipe. The external hinge pipe connector has a cylindrical rod protruding upwards and a fixing screw on the side to tighten it.

Adjustment ring pin. 26.9 mm (¾”)

External hinge pipe connector, for use in combination with Type 62.

Product number 608063B

€3.88*

A sturdy silver metal spacer ring with a polished finish, clamped securely around a blue tube. A downward-curving hook is integrated at the bottom; it is sturdy and suitable for hanging. For tubes with a diameter of 26.9 mm (¾ inch).

Adjustable ring with hook 26.9 mm (¾”)

Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.

Product number 608064B

€2.19*

A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.

Mesh holder, single 26.9 mm (¾”)

Single-sided wire mesh clamp

Product number 608070B

€1.70*

Mesh holder, double. Double-sided wire mesh clamp 26.9 mm (3/4").

Double-sided wire mesh clamp

Product number 608071B

€2.21*

A short silver metal T-piece connects a horizontal pipe to a vertical pipe. Both blue pipes are secured with grub screws. The horizontal pipe is thicker than the vertical one (unequal diameters). Rough surface: galvanised steel.

T-piece combination size horizontal 26.9 mm (3/4”) – vertical 33.7 mm (1”)

Short combination T-piece. Same as Type 2, but this version is used to connect pipes of different diameters to one another.

Product number 608002CB

€3.66*

Sturdy, silver-coloured angle connector with a rough cast finish, connecting two blue tubes: one pointing vertically upwards, the other diagonally downwards to the right. Adjustable angle, two Allen screws for fixing.

T-piece, short, adjustable 30°–60°, 26.9 mm (1”)

This adjustable angle connector is used to join tubes at angles between 30° and 60°. Suitable for diagonal connections, struts and an angled handrail connection to vertical posts on staircases.

Product number 608007B

€5.82*

Grey metal articulated foot holder with a rectangular mounting plate and two drill holes for secure wall or floor mounting. An eyelet with a hole in the centre serves as a movable pivot point. Matt, textured finish.

Articulated foot bracket (Unimass)

For fixing structures to walls or floors, usually in conjunction with Type 42.

Product number 608050

€4.52*

Silver-coloured L-shaped pipe connector that joins two blue pipes at a 90-degree angle. The metal elbow has a rough surface and several hex socket screws for securing. Three openings.

Eaves elbow 26.9 mm (½”).

This pipe connector is required for roof structures, usually in combination with type 91.

Product number 608085B

€7.75*

Grey, cross-shaped metal pipe connector, connects four blue pipes at a 90° angle. The pipes fit securely into the openings and are secured with hexagon head screws. For stabilising structures, e.g. eaves top piece.

Eaves cap 26.9 mm (3/4”)

This pipe connector is required for roof structures, usually in combination with Type 85.

Product number 608091B

€6.68*

Round, black plastic plug with a slightly textured, matt front. Sides with concentric grooves for a secure fit in thick-walled pipes or openings. For sealing pipe ends.

Plug, black plastic, 26.9 mm (¾”)

Plastic cap for sealing the pipe end.

Product number 608074B

€0.41*

A black, L-shaped Allen key for pipe connectors of sizes B and C lies on a white background. Below is a table showing the key types 608075A, 608075BC, 608075DEF, their corresponding sizes (A, B/C, D/E/F) and weights.

Allen key for pipe connectors For B / C

For sizes B / C (size B: 3/4" = 26.9 mm) (size C: 1" = 33.7 mm)You only need a simple Allen key to assemble our pipe connectors. Available in various inch sizes.

Product number 608075BC

€1.10*