40 mm square galvanised steel pipe connectors

Galvanised square pipe couplers, 40 mm

For every combined order of pipes and fittings, the shipping charges for the fittings are waived.

Sturdy, silver metal T-joint connecting three square tubes: two horizontally, one vertically downwards. Three hex socket screws secure the tubes firmly in place. Slightly textured, matt finish.

T-piece, long for square tubes – 40 mm

T-piece, long. Similar to type 608002S-40. This pipe connector can be used when a connection point is required in a horizontal pipe.

Product number 608004S-40

€15.02*

Sturdy, silver metal T-joint connector, connecting two dark blue, square tubes. One tube lies horizontally, the second is inserted vertically from above. Two hexagon head screws secure 40 mm tubes.

T-piece, short for square tubes – 40 mm

For vertical connection of two pipes. The connector cannot be used for a horizontal connection of two pipes within the connector itself.

Product number 608002S-40

€8.07*

A silver-coloured, L-shaped metal pipe connector that securely joins two dark blue square tubes at a 90-degree angle. Each end of the tube is secured with a visible Allen screw.

elbow 90°, right-angled, - 40 mm

For square tubes, for right-angled connections.

Product number 608006S-40

€12.34*

Sturdy, silver cast metal base plate supporting a dark blue, square tube. Square plate with four fixing holes and a side-mounted Allen screw for securing the 40 mm square tube.

Square base plate for square tubes – 40 mm, solid

For use in erecting a structure. Not suitable for railings or similar safety structures.

Product number 608010S-40

€14.72*

A metallic, silver-grey three-way elbow connects three dark blue square tubes at a 90-degree angle. Each tube is firmly anchored in an opening. Fixing screws are visible on the sides of the elbow, securing the tubes in place.

Three-way elbow – 90° for square tubes – 40 mm

For double right-angle connections.

Product number 608018S-40

€13.98*

Silver corner connector with visible hexagon head screws, connecting three dark blue square tubes. Two tubes run horizontally and form a 90-degree corner, whilst a third protrudes vertically upwards from the centre.

Corner piece continuous stand for square tubes – 40 mm

Corner connector (90°). With the option to connect a vertical tube at a right angle.

Product number 608020S-40

€11.02*

Rectangular, galvanised metal connector with three silver hexagon socket screws, securing three dark blue square tubes in a cross shape. Two tubes run horizontally, the third vertically through the centre. Surface rough, matt.

Cross piece, full-length, for square tubes – 40 mm

Connecting clamp between the central element and the support on railings.

Product number 608022S-40

€9.34*

Silver, galvanised metal T-piece as a 3-way connector. Connects three dark blue square tubes: one tube vertically through the centre, two horizontally at right angles to the sides. Secured with visible Allen screws.

T-piece for support tube for square tubes – 40 mm

3-way connector for fixing supports with 3 horizontal tubes arranged vertically to one another. The support tube fits through the connector.

Product number 608024S-40

€11.67*

Silver-coloured handrail bracket encloses a 40 mm square dark blue tube. Sturdy metal bracket with a rough surface secures the tube with a hexagon socket bolt on the side. Mounting plate with 2 drill holes.

Handrail bracket for square tubes – 40 mm

For fixing railings and for wall mounting.

Product number 608034S-40

€7.89*

Silver tube connector with a rough surface on a dark blue, square tube. The connector encircles the tube and has a tab on the side with a round hole for plate mounting. A screw secures it to the 40 mm tube.

Pipe connector for panel mounting for square tubes – 40 mm

Pipe connector for panel mounting.

Product number 608055S-40

€4.60*

Grey, square plastic end cap for square tubes. Smooth, slightly domed top and horizontally ribbed sides for a secure fit in the tube end. Designed to provide a secure, neat seal for tube ends.

Plastic end cap grey for square tubes – 40 x 40 mm

For sealing tube ends.

Product number 6080G74S-40

€0.82*

A black, square plastic end cap with a matt finish, designed to seal the ends of tubes. This cap, suitable for 40x40 mm square tubes, has a smooth, flat top and a ribbed underside for secure fitting.

Plastic end cap black for square pipes – 40 x 40 mm

For sealing tube ends.

Product number 608074S-40

€0.82*

Grey, galvanised metal tube connector joins two square tubes. One tube stands vertically, the other at an angle down to the left. Fixed with visible screws, rough matt finish.

Simple single joint for square tubes – 40 mm

Single-jointed connector for square tubes.Articulated tube connector for an adjustable angular connection between two tubes. The tube connectors are fitted with black-coloured screws with a serrated edge, ensuring a secure clamp and a uniform appearance. This swivel joint enables flexible connections in variable structures, for example in adjustable frames, racks or partitions. It is available in silver and black and can therefore be visually adapted to existing tubular systems.

Product number 608044S-40

€8.56*

Solid, gray-silver metal piece with a rough finish. At the top, two parallel, arched tabs form a U-shaped opening. Below this is a square block with a smaller lower section. On the right-hand side is a round protrusion. Sturdy.

Articulated bracket for square tubes – 40 mm

Female connector for square tubes, available in 25 mm and 40 mm.This connector enables a sturdy right-angled connection of square tubes and is ideal for frame and rack constructions. It is available in silver and black finishes, allowing it to be visually matched to existing systems.

Product number 608042S-40

€8.56*

Silver, metal connector for square tubes, connecting two tubes vertically. Halfway up, an L-shaped bracket with a round hole protrudes from the side. Secured with a hexagon head screw. Slightly rough surface.

Articulated eye for square tubes - 40 mm

Articulated eye.This swivel eye is used in combination with Type 42 as a swivel tube connector and enables adjustable joints in tubular structures. It is also suitable for the secure fixing of panels and boards to tubes.

Product number 608036S-40

€8.56*

Sturdy grey metal connector, designed to join six square hollow sections at a 90-degree angle. Enables stable 3D frame structures; matt, slightly textured finish similar to galvanised steel. Includes fixing bolts.

Extension piece for square tubes - 40 mm

Cross-piece for support tube.4-way tube connector for securing a vertical support with four horizontal tubes arranged at 90° angles to one another. The support tube is fed through the connector, creating a sturdy, continuous structure.

Product number 608026S-40

€8.56*

A vertical, square metal connector crafted from matte silver-grey metal with a slightly textured finish. It joins two square tubes that extend at the top and bottom. The elongated central section features two Allen screws on the front.

Extension piece for square tubes - 40 mm

Extension piece, external.Coupling clamp for the straight connection of two tubes of the same diameter. This component is not suitable for heavy vertical loads. The tube connectors are fitted with black-coloured screws with serrated edges, which ensure a secure grip on the tube.

Product number 608008S-40

€8.56*

Sturdy metal corner connector with a rough, grey finish, connecting three square hollow sections at right angles: one upwards, one downwards, one to the side. Features countersunk Allen screws, slightly uneven.

90° cross connector for 40 mm square tubes

This cross connector enables a 90° connection between continuous tubes and supports without the need to cut the tubes. This reduces cutting costs and significantly increases the stability of the structure thanks to the continuity of the tubes.

Product number 608028S-40

€8.56*

Galvanised metal fixing with a 90-degree angle and a 40 mm square cut-out, ideal for square tubes. Features a double bracket, a threaded hole with a screw and two fixing holes for shelves.

Eyelet bracket with double tab 90° for square tubes – 40 mm

Eyelet bracket with double tab 90° - 40 mm. Double-panel mounting for supporting 2 shelves at 90°.

Product number 608057S-40

€9.87*

Galvanised eyelet fitting with a 25 mm square socket for square tubes. Allen screw at the top for securing the tube. Flat double tabs on the left and right, each with a mounting hole for fixing to a panel. '46' on the inside. Matt grey.

Eyelet fitting with double flange for square tubes - 40 mm

Eyelet fitting with double tab - 40 mm. Pipe connector for panel mounting.

Product number 608056S-40

€6.95*

Sturdy, silver-grey corner base plate for secure fastening of square tubes. Rectangular base plate with two fixing holes; 40 mm tube holder with two side-mounted Allen screws for secure fastening.

Square base plate for square tubes – 40 mm

Base plate, rectangular - 40 mm. Sturdy base plate for supporting vertical posts. Wide vertical ribs with two adjusting screws increase the strength of the tube connector. The fixing holes in the base flange should correspond to the applied load.

Product number 608012S-40

€14.14*

Adjustable ring with twisted hook for square tubes – 40 mm

Adjustable ring with twisted hook – 40 mm.This adjustment ring with a hook twisted by 90° is primarily used in the construction of coat stands and similar tubular structures. It can be flexibly positioned on the tube and provides a practical hanging option for clothing and accessories.

Product number 608064S-40

€8.56*

Pipe connectors

Pipes

Inspiration

Galvanised square pipe couplers, 40 mm

Certified specialist retailer

Secure payment

TÜV tested

Recommended by architects & construction planners